|
Post by zombiedude on Dec 21, 2013 1:48:25 GMT -8
Hello,
I was interested in the 24" 6.8 SPC barrels but I was specifically wanting the target crown (non-threaded) option.
I see it listed for all the other lengths but not for the 24" bull or 24" standard profile barrels.
Is this really unavailable for the 24" or is it just an oversight?
Also, I'm not interested in the fluting but I believe the current pull-down menus for the 24" standard profile require fluting and do not have the "None" option to choose from (the "None" is available in the 24" bull barrel profile though).
Just wanted to point out perhaps a few oversights ...
Thanks
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 21, 2013 3:49:28 GMT -8
Is this on Black Hole's web site? I just looked and can't find the issues you are describing. If it is a vender we have no control over there content.
|
|
|
Post by zombiedude on Dec 21, 2013 4:14:17 GMT -8
I just checked the page again and this is what the screenshot shows for the 24" standard profile: edit: there is no threading option pulldown menu and the fluting option does not allow the "None" option.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 21, 2013 4:50:22 GMT -8
I see what you mean. They are in the process of rebuilding a new web site. The new site will be much more user friendly.
These are all custom barrels. They are not a bunch of cookie cutter one size fits all barrels. When you order you will get a barrel made to your exact specifications. If you want a target crown order it that way. It is a no charge item. Also threads are a no charge item. Fluting is an optional item. You are not required to order it.
Sorry for the mix up. I will bring this to there attention.
|
|
|
Post by zombiedude on Dec 21, 2013 5:45:38 GMT -8
OK great!
When will the new site come up?
Is it possible to order custom barrels online or do I have to call/email that order in?
Is it possible to get an estimate of weight for a barrel?
a) I'm interested in the 24" standard profile but with a .875" gas block diameter instead of a .75" gas block.
b) The other possible profile would be a bull profile with a .875" gas block diameter instead of the .936" gas block.
Any idea on weight and pricing?
Thanks!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 21, 2013 5:55:42 GMT -8
For the barrel you are wanting with a non-standard size gas block, I suggest you call in your order. The girls in the office will be able to get you a weight and lead time.
I can't tell you when the new Web site will be finished. Only that it is being completely worked over to make it more user-friendly.
|
|
|
Post by zombiedude on Dec 21, 2013 7:37:08 GMT -8
OK got it!
thanks much!
|
|