|
Post by yotehunter2 on Feb 21, 2017 19:42:17 GMT -8
My load was 85HPBT 28.5gr 8208, WSR primers at 2.258. This was virgin brass as well. I just resized, tumbled and primed these. Upon priming my primers basically fell right into the pockets with absolutely ZERO resistance. I'll shoot them again to see what happens with a milder load. My old SSA stuff would take a heck of a beating and keep going. Definitely disappointed in this
|
|
|
Post by GLSHOOTER on Feb 22, 2017 6:28:02 GMT -8
I forget. What chambering? 6X6.8 I am guessing? It's early..not enough coffee!!
Greg
|
|
|
Post by yotehunter2 on Feb 22, 2017 18:22:39 GMT -8
Yes 6x6.8
|
|
|
Post by GLSHOOTER on Feb 22, 2017 18:30:59 GMT -8
And yet I'm reading over on another board that is the best brass they have ever seen. If so I can only assume they are blind and have never actually seen any other brass. I think there is lots of back slapping good old boy kool-aid drinking going on in some boards. They get almost irrational in their lack of objectivity. It seems like the second many step away from a 223 the new cartridge is imbued with almost god-like powers. This runs the gamut from 17 Remington, 204, 6.5, 6.8, 450 and 458. Greg
|
|
|
Post by yotehunter2 on Feb 23, 2017 3:42:45 GMT -8
I'd forgot to post the picture of the brass.
|
|