evanh
Junior Member
Posts: 36
|
Post by evanh on Mar 13, 2018 19:07:54 GMT -8
Is there an ability to have a barrel machined like the Bravo Company enhanced light weight profiles? Not pencil, but a taper from the chamber to the gas block surface of .750 and then stepped down a little more toward the muzzle? What would be your opinion on the matter as well? Its kind of like what most bolt, hunting rifles come with.
Myself specifically am interested in the concept of this on an AR-10 in 308, 20 inch barrel. Primary purpose being hunting, but want it to be lighter without going to small on the barrel. I am still eyeing a barrel with the honeycomb fluting.....
|
|
|
Post by GLSHOOTER on Mar 15, 2018 12:49:39 GMT -8
Is there an ability to have a barrel machined like the Bravo Company enhanced light weight profiles? Not pencil, but a taper from the chamber to the gas block surface of .750 and then stepped down a little more toward the muzzle? What would be your opinion on the matter as well? Its kind of like what most bolt, hunting rifles come with. Myself specifically am interested in the concept of this on an AR-10 in 308, 20 inch barrel. Primary purpose being hunting, but want it to be lighter without going to small on the barrel. I am still eyeing a barrel with the honeycomb fluting..... You would have to contact CRA directly on that but I suspect the chances are very slim as one off profiles are very expensive to do in time and money. Honeycomb has the biggest weight reduction Greg
|
|
|
Post by thehartofthings on Aug 9, 2019 9:36:24 GMT -8
Is the national match profile still available, , is it .936 or bull out to shoulder then 750 gas and on out to muzzle
Yes and yes. A bull is 936.
I would call them direct on this if you have any specific questions to verify.
gre
|
|