|
Post by toolsofthetrade on Jun 1, 2011 7:38:02 GMT -8
What mags are you guys using for you're .264 LBC guns? Carl mentioned using PMags I thought, 20's, 30'? what do you end up with for capacity do you have to do any mods?
C products mags seem to be hit and miss but from what Ive gathered they went out of business and were bought bu D&H who is known for better quality.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 1, 2011 7:54:12 GMT -8
We have been using C mags. You can also get mags from Palmetto State Armory. Palmetto mags seem to work well.
|
|
|
Post by toolsofthetrade on Jun 1, 2011 9:35:08 GMT -8
thats what I have now and according to Carl, they aren't feeding my rifle well.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 1, 2011 9:55:32 GMT -8
What ammo you using?
|
|
|
Post by toolsofthetrade on Jun 1, 2011 11:41:24 GMT -8
Factory wolf gold I believe is what carl is using, he said his GI spec mags are running fine in it but my c mags are not
|
|
|
Post by ballardw on Jun 1, 2011 21:28:47 GMT -8
|
|
|
Post by toolsofthetrade on Jun 2, 2011 5:14:54 GMT -8
I have several many variations of normal mags everything from Thermomold to Orlite to COLT, maybe I will take the followers out of the cmags and try them in the others....when I get my upper back from carl
|
|
|
Post by curlymaple42 on Jun 10, 2011 6:48:24 GMT -8
www.44mag.com/product/6_5_grendel_5_magazine/6_5_grendel_ar15_magazinesThey only have the 5rd ones in stock and all the CP stuff is on closeout. That is where I got all my 6.5 mags, but not sure if they are going to carry them with the new name or not. Probably a call to 44mag.com or an email would answer that though. I will have to check out the Palmetto place too. I have enough mags though for now.
|
|
|
Post by thesilent1 on Jun 11, 2011 15:37:32 GMT -8
I have had pretty good luck with the C-Products mags made specifically for this chambering. Bought a lot of them from 44mag.com, so I should have a good supply till C-Products gets its act together and is re-born. This is a good lesson on making sure that you get enough magazines for whatever you need. Never know when the supply can dry up.......
|
|
|
Post by durhamster on Jun 11, 2011 16:03:28 GMT -8
try p-mags 20 rd. load 10 rd. works.
I used a round file to put a romp on the mag. feeds well.
|
|
244
Junior Member
Posts: 18
|
Post by 244 on Jun 17, 2011 21:42:36 GMT -8
Does anyone know if 6.8SPC mags work with the .264LBC?
I've heard that they do, but I haven't confirmed this for myself.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 18, 2011 5:26:03 GMT -8
I can't tell you if 6.8 mags work for a 6.5. But I have been using C mags, 6.5 mags in a 6.8. I have not had a problem or a failure to feed of any kind.
|
|
|
Post by toolsofthetrade on Jun 18, 2011 18:40:41 GMT -8
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 19, 2011 5:36:24 GMT -8
|
|
|
Post by toolsofthetrade on Jun 19, 2011 10:24:31 GMT -8
|
|