mattri
Junior Member
Posts: 14
|
Post by mattri on Feb 25, 2013 4:18:16 GMT -8
Looking at swapping the factory barrel on a DPMS Sportical to a BHW 6x45.
I've done barrel swaps on Savages before, but never an AR.
I've done enough digging that I have a decent understanding of the process, but a little more information never hurts.
Is there somewhere that shows a step by step? Thanks, Matt.
|
|
dr69er
Senior Member
Protect the US Consitution & the American Way.
Posts: 222
|
Post by dr69er on Feb 25, 2013 7:57:43 GMT -8
Perhaps this video will give you a good Idea on how it's done... there are two video to this:
You will need a few basic tools to remove the handguard(s)/forend & barrel nut etc. Just be careful not to over torque barrel nut and such...and properly secure the upper to a vice etc...
Good Luck.
|
|
mattri
Junior Member
Posts: 14
|
Post by mattri on Feb 26, 2013 15:49:48 GMT -8
Great post- thanks. Going to need to watch it a few more times and then will have some more questions.
|
|