|
Post by flexbravo on Mar 19, 2013 21:30:21 GMT -8
I have a 16" midlength barrel on order and am wondering if BHW has any recommendations for buffer weight and spring based on their gas port size.
I am considering a Tubbs spring and leaning towards an H buffer unless the BHW staff recommends a different weight of buffer for their 16" barrel and the Tubbs flat wire spring.
Thanks
|
|
jmpntx
Junior Member
Posts: 18
|
Post by jmpntx on Mar 20, 2013 4:46:17 GMT -8
I'm using a Spikes Tactical ST-T2 buffer and Sprinco 'blue' spring in mine. Works great.
H-1 should work well too. The ST-T2 is between H-1 and H-2 in weight.
|
|
jmpntx
Junior Member
Posts: 18
|
Post by jmpntx on Mar 20, 2013 4:49:52 GMT -8
I'm using a Spikes Tactical ST-T2 buffer and Sprinco 'blue' spring in mine. Works great.
H-1 should work well too. The ST-T2 is between H-1 and H-2 in weight.
|
|
|
Post by flexbravo on Mar 20, 2013 10:01:02 GMT -8
How is that Sprinco for sound?
One of the reasons I was considering the Tubbs is that it is supposed to be quiet. I don't care for that rawk sound when you pull the bolt back and the sproing when firing.
|
|
|
Post by alaska on Dec 14, 2014 15:03:31 GMT -8
I use a MK 12 with 18" Douglas Gas Port Size .102"
My stock is the LMT SOPMOD carbine I use the Colt H buffer and a Spinco Standard Carbine Spring With the M16 carrier and Sharps Reli Bolt with the 5 coil extractor spring and black insert and McFarland one piece gas ring with the WMD coating Rifle length gas system
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 7, 2015 13:48:30 GMT -8
|
|