|
Post by cosh on Oct 5, 2014 17:16:41 GMT -8
This is my first 264 LBC build. It has a 20-inch SS barrel, target crown. This was more fun than I thought it would be. Thanks to the BHW team for helping me and getting this done. To keep in line - pics or it didn't happen . . here you go!! Thank you Greg for helping on confiming the Type 1 bolt. It seems to seat well into the barrel. Dry run with the Hornady 123gr SST feed and eject with no issues. Lets see if I can post the pictures. Barrel fit tightly in the receiver. Looks straight to me, can't tell much in a camera shot . . need to get it out and shoot some. Magpul FDE stock and grip along with black MBUS - side shot. The 20-inch barrel seems to balance well just in front of the receiver. Sorry for a few buff marks on the stainless. I need to polish them out. Nice engraving for the 264 LBC.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 5, 2014 18:18:05 GMT -8
That is very nice looking!!!!!!!! Make sure you post some pictures of your targets.
|
|
|
Post by cosh on Oct 14, 2014 6:37:21 GMT -8
I was able to get out on Columbus Day to do a first test. Only irons and windy, sorry no targets. Bolt cycled well, good lockup. I was hoping that the mid-length port would not be an issue with the gas block not adjustable. I like the Grendel 1st time out.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 9, 2015 13:15:56 GMT -8
which profile is that barrel
|
|