|
Post by bobtails1 on Oct 16, 2015 8:37:23 GMT -8
|
|
|
Post by bobtails1 on Nov 6, 2015 14:19:09 GMT -8
OK new deal
It is a 20" standard profile barrel. 1:8 twist BHW barrel smithed and assembled by Ritch Johnson. It has a adjustable gas block, threaded 5/8x24. mid lenght handgaurd. and likes the sierra 69 grain bullets. I havent shot it alot and my best group was around 5/8 to 3/4 of a inch. It was painted but I stripped it. It left a blotchy kinda finish on the anodizing. Purely cosmetic. I tried to show it in pics I have 491 pieces of Federal 6.8 spc brass 1x fired that has been necked down. 86 is 1x time shot as 22x6.8. ( it was all shot as 6.8 spc before.). I have a redding 6.8 SPC neck sizing die with the bushing that all the brass before fired will have to be bumped. With the sizing die to set shoulder correct. I will include the remainder of the 69 grain Sierra bullets I have. The trades I am interested in is a Rem model 700 action .473 BF, vortex razor binos or nice scope. $850 is what I paid in July for the upper alone so I would like $850 plus shipping for upper, die, brass and bullets. Or I would sell the barrel with brass and sizing die for $400.
|
|
|
Post by jmarms on Dec 25, 2015 17:19:04 GMT -8
Still for sale?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 26, 2015 5:43:52 GMT -8
The rifle was sold a few weeks ago. The new owner contacted me for some load data.
|
|
|
Post by devildogandboy on Dec 26, 2015 5:48:04 GMT -8
where did you get the thread protector? i need one.
Bruce
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 26, 2015 7:33:31 GMT -8
It's a Yankee Hill. You can buy them from Midway USA
|
|
|
Post by devildogandboy on Dec 26, 2015 11:31:45 GMT -8
It's a Yankee Hill. You can buy them from Midway USA thank you. Bruce
|
|