|
Post by zr600 on Aug 5, 2016 9:15:40 GMT -8
Ok what do you guys that sort brass exactly do to sort it to get the best accuracy from start to finish with prepping cleaning and what you do for sorting?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 5, 2016 14:44:46 GMT -8
Ok what do you guys that sort brass exactly do to sort it to get the best accuracy from start to finish with prepping cleaning and what you do for sorting? I sort brass down to .02 of a grain for match stuff. I go half a grain on the stuff I hunt with. I then trim, debur, chamfer the inside of the flash hole, cut the primer pocket to the same depth and then neck turn. After that is finished I will sort them again by weight. It takes about 200 cases to get 50 that are true match brass.
|
|