|
Post by bm3rc on Dec 8, 2016 18:35:23 GMT -8
Throwing a .308 Remage together and I am having issues with my new barrel I got today.
The bolt nose recess was cut to 1.31". This is not deep enough and is causing headspacing issues. My factory barrel is at .154" which is pretty standard for most. That is a big difference. Any idea why this is cut so short?
Also there are not enough threads to put on a .250 recoil lug. I read on these forums that the barrels were made to go to .250.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 9, 2016 3:35:16 GMT -8
Throwing a .308 Remage together and I am having issues with my new barrel I got today. The bolt nose recess was cut to 1.31". This is not deep enough and is causing headspacing issues. My factory barrel is at .154" which is pretty standard for most. That is a big difference. Any idea why this is cut so short? Also there are not enough threads to put on a .250 recoil lug. I read on these forums that the barrels were made to go to .250. A call to Black Hole would be in order on this. Ask for JP he will get you fixed up.
|
|