Post by thehartofthings on Dec 22, 2016 17:20:34 GMT -8
Got it put together and took it out to the range. 55grn ballistic tips and 87grn bthp. Very accurate from the start. Mines a 24"STD profile, I packed some H335 and it did real well. Went ahead and ordered a redding type s die and a couple bushings for reducing the neck. What I found was that I could make a round using my 6mm ppc sizer dies but after the first firing I wasn't able to get sufficient neck tension anymore, so I figured the same bushing will fix that
