|
Post by zr600 on Feb 6, 2017 21:58:20 GMT -8
Ok I know Slower powders have been used with good success and faster powders are being used so how come nobody is using varget? I have good luck with rl15 and the powder burn rate I seen rl15 is slower then varget. I need a good reason not to try varget I guess.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 7, 2017 3:46:34 GMT -8
There are no good reasons. Go ahead and try it!!! l Let us know how it works out. Be sure to report back with your worked up data.
|
|
|
Post by zr600 on Feb 14, 2017 8:39:11 GMT -8
Well I had very good luck with varget and 87g Berger vlds. Got a .4" group at about 2940fps.
|
|
|
Post by desertdog on Feb 14, 2017 11:50:36 GMT -8
What was the powder charge?
|
|
|
Post by zr600 on Feb 14, 2017 15:15:39 GMT -8
29.8g I would work up to this though this is starting to show the sign of pressure on the primer but the brass didn't have ejector marks or swipes.
|
|
|
Post by desertdog on Feb 14, 2017 17:08:05 GMT -8
Sounds good... is that a 22" barrel?
|
|
|
Post by zr600 on Feb 14, 2017 17:46:12 GMT -8
Yea it is a 22" bull barrel!
|
|
|
Post by zr600 on Feb 14, 2017 17:50:22 GMT -8
|
|