|
|
Post by eagle1899 on Sept 9, 2017 6:41:19 GMT -8
I'm really looking into ordering a 243 LBC. I have a few questions.
What are the neck and throat dimensions? Just want to get an idea of what bullets will work at mag length and all what brass will work.
Do you have plans to offer any twist faster than 1-8" ? I run a BR and found that 110's or heavier require at least a 1-7.5 to get the most from them. A 1-7" would be ideal.
Would it be an option to get a barrel made with a +2 gas system?
Thank you in advance!!! |
|
|
|
Post by GLSHOOTER on Sept 10, 2017 6:38:55 GMT -8
I'm really looking into ordering a 243 LBC. I have a few questions.
What are the neck and throat dimensions? Just want to get an idea of what bullets will work at mag length and all what brass will work.
Do you have plans to offer any twist faster than 1-8" ? I run a BR and found that 110's or heavier require at least a 1-7.5 to get the most from them. A 1-7" would be ideal.
Would it be an option to get a barrel made with a +2 gas system?
Thank you in advance!!! .276 neck. 0.098 free bore. Throated for the VLD's The 1:8 handles everything up to 105's without issue. Anything over a 105 is a waste of capacity vs. speed. We use ASC magazines to load out to 2.314 nominal This isn't a BR and you have to realize that going in. The 95 SMK is good for paper at 1000 so that's all I ask shooting out of a 1:9. No plans for a 1:7 to my knowledge. A 2+ gas would have to go directly to BHW for an answer. They DO NOT follow this Forum. The Administrators here are non-paid Pro Staff that like to shoot. Greg |
|
