|
|
Post by wfa on Jan 3, 2018 21:39:11 GMT -8
I've had excellent results using the subject bullet. Accuracy is a bit over 1 MOA for 7-10 shot groups, BC is .340/SD .238. I use ASC magazines, so do load just a tad longer than standard (2.295 +/-) with no feeding/ejection issues. Velocity in the 25-45 is above that of the 25-35 which is what the bullet was designed for - so it should expand just fine. Has anyone else experimented with this bullet? Results?  |
|
|
|
Post by GLSHOOTER on Jan 4, 2018 9:47:03 GMT -8
I have not tried that one but it sounds like a perfect match for the cartridge.
Greg
|
|
|
|
Post by wfa on Jan 4, 2018 14:31:45 GMT -8
Finally found one of my targets. Cases trimmed to minimum length (leave near max if you want to crimp, but it's not necessary and will destroy groups (IMO)), Hi 2510, Low 2487, Avg: 2499, ES 23, SD 8, Barrel is BHW 20". SRC was sent my data so I leave it to them to pressure check, release as they see fit. Until then, I'll just say "safe in my rifle" without details.  |
|
|
|
Post by GLSHOOTER on Jan 4, 2018 14:36:45 GMT -8
Looks very good.
Greg
|
|
|
|
Post by wfa on Jan 15, 2018 12:37:53 GMT -8
This 17 shot group was using 6X reloaded PAC brass, BULK Hornady "seconds" from MidWay, 100 yards, 2499 FPS AVG, SD 8, CCI450, AA2200. The fliers are the price you pay for "bulk seconds".  |
|
|
|
Post by GLSHOOTER on Jan 15, 2018 16:06:01 GMT -8
I gotta find me some of those bullets.
Greg
|
|
