|
Post by aolson on Mar 1, 2018 9:23:10 GMT -8
I'm about start building my 22LBC and I'm going to order Redding Bushing dies. I can't seem to find what size bushings I'll need. It seems that three passes with different bushings may be the best route. Thanks.
|
|
|
Post by GLSHOOTER on Mar 2, 2018 6:34:00 GMT -8
I'm about start building my 22LBC and I'm going to order Redding Bushing dies. I can't seem to find what size bushings I'll need. It seems that three passes with different bushings may be the best route. Thanks. The final one depends on your brass as different brands vary. Do not use any expanders. Chamfer the mouths in and out BEFORE you start. We have found that WILSON bushings are superior to the Reddings because they have the chamfer that helps start them. I use 279-265- 251 Make sure you don't bump the shoulders back on your forming.All you want to do is size the necks.. Greg
|
|
|
Post by aolson on Mar 4, 2018 8:23:48 GMT -8
Thank you. I appreciate the info. I've read that the Hornady Grendel brass is a lot better than what it once was. I'll probably go with that, at least initially.
|
|