|
|
Post by offroader1006 on Dec 15, 2011 11:48:15 GMT -8
  This was my first time using a BHW barrel, and after the shooting it, I dont think I'll ever use another brand. I am already waiting on my second BHW barrel, an 18" rifle length.  |
|
|
|
Post by letaz77 on Dec 15, 2011 12:28:29 GMT -8
Very nice set up with the Adams Arms Piston system and the MagPul hand-guards. I didn't know the MagPul fitted OK over the piston system. Generally there is not enough clearance and the piston hits or gets stuck on the hand-guard.
All together a very nice a very well rounded system. Got me turning green with envy.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 15, 2011 12:55:26 GMT -8
Welcome to the BHW forum. Awesome build, Thanks for sharing! We're happy to hear you're enjoying your barrel. ;D
|
|
|
|
Post by offroader1006 on Dec 15, 2011 14:54:19 GMT -8
Very nice set up with the Adams Arms Piston system and the MagPul hand-guards. I didn't know the MagPul fitted OK over the piston system. Generally there is not enough clearance and the piston hits or gets stuck on the hand-guard. All together a very nice a very well rounded system. Got me turning green with envy. Thanks. The MOE's look like they were made for the AA kit. They fit perfectly around the gas block, and have plenty of room for the op rod. They even have some nice cut outs on top that you would swear were made with the piston kit in mind.  |
|
|
|
Post by offroader1006 on Dec 15, 2011 14:57:10 GMT -8
Welcome to the BHW forum. Awesome build, Thanks for sharing! We're happy to hear you're enjoying your barrel. ;D Thanks. I feel like I am doing an injustice by not free floating the barrel. ;D |
|
|
|
Post by guncollector on Dec 15, 2011 16:39:44 GMT -8
What brand of upper receiver did you use?
|
|
|
|
Post by GLSHOOTER on Dec 15, 2011 16:55:03 GMT -8
Very nice set up. I'm sure it will fil the bill.
Greg
|
|
|
|
Post by offroader1006 on Dec 16, 2011 6:52:29 GMT -8
What brand of upper receiver did you use? It's a Rainier Arms Ultramatch billet upper. |
|
|
|
Post by rancher81 on Dec 16, 2011 8:03:38 GMT -8
nice setup, which profile barrel did you use?
|
|
|
|
Post by letaz77 on Dec 16, 2011 14:47:09 GMT -8
Hey offroader1006, you may also brag about your pedicure in the first picture...The bare floor wasn't too cold, I hope. ;D
|
|
|
|
Post by GLSHOOTER on Dec 16, 2011 15:42:09 GMT -8
Hey offroader1006, you may also brag about your pedicure in the first picture...The bare floor wasn't too cold, I hope. ;D That is how you add foot to the barrel length!!  Greg |
|
|
|
Post by offroader1006 on Dec 16, 2011 17:31:22 GMT -8
nice setup, which profile barrel did you use? It's the standard profile barrel. |
|
|
|
Post by offroader1006 on Dec 16, 2011 17:32:49 GMT -8
Hey offroader1006, you may also brag about your pedicure in the first picture...The bare floor wasn't too cold, I hope. ;D Thanks, that picture was taken during fall, so I still had to keep the nails nice for my flip flops. ;D |
|
|
|
Post by guncollector on Dec 17, 2011 0:40:26 GMT -8
What brand of upper receiver did you use? It's a Rainier Arms Ultramatch billet upper. Thanks for the reply. I like the looks of that upper receiver. It looks like the walls of the receiver are a little thicker than a mil-spec receiver. I'll have to check out their website. |
|
quincy
Junior Member
Posts: 11
|
Post by quincy on Jan 28, 2012 12:56:43 GMT -8
The MOE's look like they were made for the AA kit. They fit perfectly around the gas block, and have plenty of room for the op rod. They even have some nice cut outs on top that you would swear were made with the piston kit in mind.
I'm pretty sure they were made w/a piston kit in mind.
|
|
