|
20 lbc
Mar 23, 2011 11:58:43 GMT -8
Post by Master Yoda on Mar 23, 2011 11:58:43 GMT -8
Hey guys's we have ordered a reamer for a 264 Lbc case with a 20 cal bullet aka - 20Lbc
it will a few weeks before it gets in, but it looks like a winner.
|
|
Deleted
Deleted Member
Posts: 0
|
20 lbc
Mar 23, 2011 12:12:47 GMT -8
Post by Deleted on Mar 23, 2011 12:12:47 GMT -8
Sounds good to me,, Cant wait to see the speeds we get out of it , after seeing what Kerry is getting from the 243 LBC . The 20 LBC will be a Rockchucks nightmare, along with all types of other critters that cross my path lol.
|
|
|
20 lbc
Mar 23, 2011 19:54:40 GMT -8
Post by carvercalls on Mar 23, 2011 19:54:40 GMT -8
I cant wait Carl, After testing the 243 LBC, I know for a fact this new 20 will be a winner!!
|
|
Deleted
Deleted Member
Posts: 0
|
20 lbc
Mar 26, 2011 7:10:39 GMT -8
Post by Deleted on Mar 26, 2011 7:10:39 GMT -8
After running the numbers it looks like all the rest of the 20's will be trying for 2nd place. This thing will be flat out FAST!!!!!!!
|
|
Deleted
Deleted Member
Posts: 0
|
20 lbc
Mar 26, 2011 7:21:01 GMT -8
Post by Deleted on Mar 26, 2011 7:21:01 GMT -8
Carl once you get the drawing for the 20LBC ,,shoot me a PM with it, so i can get all my reloading stuff together for it.
Thanks Billy
|
|
|
20 lbc
Mar 28, 2011 3:46:02 GMT -8
Post by carvercalls on Mar 28, 2011 3:46:02 GMT -8
Carl once you get the drawing for the 20LBC ,,shoot me a PM with it, so i can get all my reloading stuff together for it. Thanks Billy Send it to me also!!
|
|
Deleted
Deleted Member
Posts: 0
|
20 lbc
Mar 28, 2011 4:58:02 GMT -8
Post by Deleted on Mar 28, 2011 4:58:02 GMT -8
I would also like a copy.
|
|
|
20 lbc
Jun 8, 2011 21:18:54 GMT -8
Post by hawsepiper on Jun 8, 2011 21:18:54 GMT -8
This barrel available yet?
|
|
Deleted
Deleted Member
Posts: 0
|
20 lbc
Jun 10, 2011 3:44:35 GMT -8
Post by Deleted on Jun 10, 2011 3:44:35 GMT -8
Not yet but won't be long,should be testing them anytime now
|
|
|
20 lbc
Jun 22, 2011 19:49:56 GMT -8
Post by GLSHOOTER on Jun 22, 2011 19:49:56 GMT -8
Well the 20 LBC looks like a PD's nightmare. I know the 264 LBC is the parent case and it has to be necked down. Has anyone made up a batch yet? What dies and steps are you taking?
I figure a Reeding Type S Bushing FL die for the 6.5 Grendel using a two step approach to necking them down might be the way to go. My gut tells me drooping 0.060 in one step with a standard die might be just a bit too much.
Since the 264 brass is available from Baer or the Grendel stuff from AA, Hornady and Lapua it will be interesting to see if the process will allow for case forming without neck turning.
So any hints as I may well have one of these hot rockets to play with in the near future.
Greg
|
|