204ar
Full Member
Posts: 70
|
Post by 204ar on Jul 23, 2012 17:18:42 GMT -8
You're correct on the Keis gas block, only available as .750, but that's what I got ordered for a barrel so should be gtg.
|
|
|
Post by GLSHOOTER on Jul 23, 2012 17:39:59 GMT -8
You're correct on the Keis gas block, only available as .750, but that's what I got ordered for a barrel so should be gtg. I was thinking of Fluted Barrels needs. LOL Greg
|
|
|
Post by Brandon Sneed on Jul 23, 2012 18:41:41 GMT -8
With the largest hunting related trade show coming up in a month I've been extremely busy buying parts and building uppers for the booth I've rented. Will have, hopefully, a completed 308 AR10, and multiple uppers available for show in 223, 204, 300blk, 6x6.8, 243lbc, 264lbc and of course, 6.8 spc.
All of these uppers will be sporting a Black Hole barrel except the 6.8. But that's because I've had a pistol build waiting on a special 6groove barrel for some time now.
Most of my uppers sport the Apex Machine or Troy TRX alpha rail, but the majority of these will be a hogue or young manuf free float forearm.
|
|
|
Post by flutedbull204 on Jul 23, 2012 20:24:31 GMT -8
Wish I had your resources to spend on that many builds, it has been tough just to get my 264 build paid for! But my BHW barrel is ordered, and can not wait to shoot it......by the way, where is this large trade show at?
|
|
|
Post by Brandon Sneed on Jul 24, 2012 3:49:45 GMT -8
The show is the Texas Trophy Hunters Association Extravaganza. Will have three locations, Houston is next weekend, Dallas/Ft Worth a week or so after that and then here in San Antonio end of August.
My resources come from my own FFL and using any money set aside out of my other business. The wife is not too thrilled about the $ spent on getting ready but it's a capitalized expense for me. So it will be okay in the long run. Few years at least.
Not to mention it serves as good advertisement for showing off later on to customers who are unsure what the product looks like in person.
|
|
allen
New Member
Posts: 5
|
Post by allen on Jul 25, 2012 5:37:01 GMT -8
I got a 20" bull barrel from DEZ arms with a yhm smooth freefloat, a tactical charging handle, a Burris fullfield e1 4.5-14, and it shoots around 3/8 to a half inch with 55gr Sierra gamekings on top of a compressed load of varget.
|
|
|
Post by ducksmasher on Oct 20, 2012 4:57:36 GMT -8
Just finished building a 300blk. Now I'm waiting on call from liberty Suppressors to have my Leonidas installed.
BHW LH railed upper 10 noveske barrel with low pro gas block YHM light weight Hand guard Lower spikes tactical Fl edition
|
|
|
Post by GLSHOOTER on Nov 7, 2012 14:55:32 GMT -8
I've seen more activity from an armadillo with a semis tire track over his shell than we have on this one!! Surely in this whole great country we have more than two builds going on? Give it up guys, what'cha got? Greg PS: I just mounted a new Vortex Viper on my 243 LBC using 20 MOA inserts in the rings. Going to go 1000 next week if all is well.
|
|
|
Post by chinaheart on Nov 17, 2012 15:03:27 GMT -8
Finally Completed my Hello Kitty Build for the wife. I'd like to take this moment to thank the entire BHW crew for thier help and support with this project. Kyrstin (Kizmit) for her excellent artwork. Andy for turning the barrell down to the exact specs I needed, and we can't leave out Stacy for her teriffic customer service skills. Thank you all. We've been far far too busy to take her to the range, but I will certainly come back with a range report. From what I have heard and seen so far, I don't think it will group anything shy of awesome. Below are the best pics I could take with my camera. My SLR is quite capable, I on the other hand, am not. Kizmit's artwork. One paw for each cat we own. (Yes, it's a zoo over here). Andy's handiwork. Turning down that barrell profile so that I can jazz it up with a JP heat sink peeking through the AP Custom carbon fiber handguard. The overall rifle. Light as heck, pretty, and chock full of Hello Kitty baddassery.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 11, 2012 18:33:10 GMT -8
Im building a 20 practical, but in a bolt gun with a BHW bbl. Nothing fancy though.
|
|
|
Post by GLSHOOTER on Dec 12, 2012 7:55:05 GMT -8
Finally Completed my Hello Kitty Build for the wife. quote] That is a very well thought out rifle. Executed with good taste and I'm sure is a real pleaser for the wife. Greg
|
|
|
Post by GLSHOOTER on Dec 12, 2012 7:55:43 GMT -8
Im building a 20 practical, but in a bolt gun with a BHW bbl. Nothing fancy though. Do I smell a SAVAGE? Greg
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 12, 2012 13:26:45 GMT -8
Im building a 20 practical, but in a bolt gun with a BHW bbl. Nothing fancy though. Do I smell a SAVAGE? Greg Well naturally....
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 12, 2012 19:25:06 GMT -8
This is a mega billet with a 20" krieger barrel 308w custom chamber, Giselle group and jp internals. The les baer and this one are the most accurate 308 ARs I have shot. Consistent 1/2moa. Not internet MOAs but the real ones. The Knights cannot touch any of those setups. BTW the blackhole 308w 16" carbine is amazing too. Very very accurate. LEt me see if I find a picture somewhere.
|
|
aspp
Junior Member
Posts: 44
|
Post by aspp on Dec 15, 2012 11:28:24 GMT -8
Here is where I am at in my current endeavor, still not sure what caliber Im going to go with (20 practical, 223, or 6x45 are the options). Upper: Mega side charger, Troy 11" battle rail, micro gas block (might swap out for the new Wilson Tactical adjustable) and a BRT linear comp. Lower: 80% I milled myself, CMMG lpk in the mail. Thinking a ARFX skeleton stock will go nice for my next yote gun!
|
|