|
|
Post by Master Yoda on Jul 15, 2012 20:29:25 GMT -8
Generation II is finally done  in 5/8x24 and 1/2x28 Attachments:
|
|
|
|
Post by flutedbull204 on Jul 16, 2012 6:15:59 GMT -8
Any way to get these in satin? Are they avail through BHW?
|
|
|
|
Post by inferno333 on Jul 16, 2012 8:08:57 GMT -8
I must ask.
What is new and improved?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 16, 2012 8:16:04 GMT -8
The way they are manufactured is different. They still work great, the same as the original Dragon Head.
|
|
|
|
Post by inferno333 on Jul 16, 2012 8:25:29 GMT -8
So more of an improvement in the efficiency of machining and probably an improved ability to meet an exact tolerance? I like it.  I may use this new beast on my AR build. |
|
|
|
Post by flutedbull204 on Jul 20, 2012 4:39:24 GMT -8
I have one on order through Tactical Ammunition...they said it would be about a week before it gets sent out.....the one I ordered was for a .264 lbc....so I am not sure of the availability of the one for the 5.56
|
|
|
|
Post by flutedbull204 on Aug 21, 2012 4:33:46 GMT -8
Talking with Josh over at Tact Ammo, he said they are having some issues with the Gen II production, they are waiting on something to be able to complete the brakes, could be a couple of weeks yet before they are ready! Just wanted to let you all know. They do have their .264 bolts ready to ship though ;D
|
|
|
|
Post by inferno333 on Aug 21, 2012 8:10:17 GMT -8
Are these able to be pinned or welded so make my barrel legal?
|
|
|
|
Post by GLSHOOTER on Aug 21, 2012 12:49:45 GMT -8
Are these able to be pinned or welded so make my barrel legal? Looking at the pic I don't see why you couldn't pin them . They are pretty thick but the principle would be the same. I'd do some set screws and then hit the hole with a welder if it were me. It would finish up nicely with a good hide on the holes. Greg |
|
|
|
Post by inferno333 on Aug 21, 2012 14:04:54 GMT -8
Good to know!
All the parts will be sent to Ritch @ RPG to put together.
I'm sure I could put it together myself, but I'll just let a professional handle it.
|
|
|
|
Post by GLSHOOTER on Aug 21, 2012 15:23:57 GMT -8
Good to know! All the parts will be sent to Ritch @ RPG to put together. I'm sure I could put it together myself, but I'll just let a professional handle it. I think you will be happy. Ritch has managed to work with the ratty parts I send him and so far every one has been a shooting machine. I think he even poured an extra can of X's in the 6X68 for me!!! Greg |
|
|
|
Post by inferno333 on Aug 21, 2012 18:08:27 GMT -8
It's kind of my present to myself after this deployment. It's not really supposed to be a tack-driver since it has a 14.5" barrel. I'm looking for absolute reliability and damn good accuracy.
It will look pretty awesome too, but that's also secondary.
|
|
|
|
Post by WPD4323 on Aug 22, 2012 5:37:27 GMT -8
IF IT COMES FROM RITCH IT WILL BE BOTH.
|
|
|
|
Post by inferno333 on Aug 23, 2012 14:44:14 GMT -8
I sure hope so! I'm really looking forward to this rifle.
|
|
|
|
Post by GLSHOOTER on Aug 23, 2012 18:13:52 GMT -8
I sure hope so! I'm really looking forward to this rifle. Have you talked to Ritch about the specifics on this one? Greg |
|
in 5/8x24 and 1/2x28
