Win75
Full Member
Posts: 77
|
Post by Win75 on Apr 4, 2013 19:58:43 GMT -8
Will this work? I ran one through my Redding sizer die and it looks close.
|
|
dr69er
Senior Member
Protect the US Consitution & the American Way.
Posts: 222
|
Post by dr69er on Apr 4, 2013 20:04:16 GMT -8
Yes you can use X39 brass to fireform Into Grendel brass...
Good Luck.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 5, 2013 5:38:25 GMT -8
Will this work? I ran one through my Redding sizer die and it looks close. Yes it will work. BUT it will be short. You will also have to seat your bullets long and jam the rifling to keep the brass concentric before it is fire formed. Also pay close attention where you set the shoulder when you run your brass through the size die. It's best to have your die set with a case from your chamber, before you start. |
|
|
|
Post by overwatcher on Apr 10, 2013 6:51:13 GMT -8
Also make sure you are backing off load data 1.5-2 gr.for X39 brass.
Big difference in case capacity.
|
|
