|
Post by 65creedmoor on Dec 3, 2014 13:01:31 GMT -8
Can anyone with a BHW AR10 light profile barrel especially in .264/6.5mm tell me the diameter of the barrel just before the muzzle threads start?
I am trying to get a custom brake made and need the diameter ASAP.
|
|
|
Post by GLSHOOTER on Dec 3, 2014 15:52:53 GMT -8
I sent that on to Jason. Perhaps he will chime in. You also might direct your question to SALES. They don't read these Forums and might better assist that way.
Greg
|
|
|
Post by 65creedmoor on Dec 3, 2014 16:40:39 GMT -8
Thanks GLSHOOTER I did send an email to BHW through the web sit contact but I imagine they are busy with all the BF orders they received. Was hoping someone on the forum would be able to give me the dimension. My brake is ready except for the taper profile cut.
|
|
|
Post by GLSHOOTER on Dec 4, 2014 6:23:26 GMT -8
Greg-
If its an LR profile it will be .730”. Hope this helps.
-Jay
|
|
|
Post by 65creedmoor on Dec 4, 2014 7:15:49 GMT -8
Thanks! That is what I needed.
|
|