|
|
Post by mosigdude on Mar 17, 2015 22:16:10 GMT -8
Does anyone have a load worked up for their 20 Practical using either Midsouth's 34gr Varmint Nightmare Extreme or Midway's 34gr Dogtown bullet? I understand they are the same bullet, just looking for a good place to start with these.
Thank you in advance,
Tim
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 18, 2015 4:57:34 GMT -8
Does anyone have a load worked up for their 20 Practical using either Midsouth's 34gr Varmint Nightmare Extreme or Midway's 34gr Dogtown bullet? I understand they are the same bullet, just looking for a good place to start with these. Thank you in advance, Tim I'm shooting 25.5 grains of Benchmark with a 35 grain Berger. It should interchange easily. |
|
|
|
Post by mosigdude on Mar 19, 2015 19:32:52 GMT -8
Perfect, any feel for what kinds of speeds I could expect on this load from a 24" tube?
|
|
|
|
Post by GLSHOOTER on Mar 20, 2015 5:52:35 GMT -8
Perfect, any feel for what kinds of speeds I could expect on this load from a 24" tube? Somewhere around 3900+. I get 32's up to North of 4,000. Somewhat dependent on your twist rate. I'm not sure what the speed/rotational envelope is on them. I know that 40 VMAX don't like 3750 in a 1:8 in 223 bore size. Greg |
|
