Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 5, 2012 15:39:55 GMT -8
A member of the forum, Skeeter3200 sent me this target. He shot it with a rifle I built for him. The dot is 1 inch in diameter. Very impressive. 24" 243 LBC 10 twist, machine finish with a target crown. DPMS smooth side upper Kies adjustable gas block YHM free float tube Load was 32 gr. IMR 8208, CCI 400 primer, Lapua brass. Topped off with a 58 gr Vmax.
|
|
|
Post by jamesg651 on Sept 5, 2012 19:22:26 GMT -8
Nice group! Can't wait to get mine.... that gives me another load to try, thanks.
|
|
|
Post by inferno333 on Sept 5, 2012 19:25:58 GMT -8
That is amazing! Looks like a very solid .5" group! Ready to take out some varmints!
I can't wait for you to build my rifle!
|
|
|
Post by GLSHOOTER on Sept 5, 2012 20:15:37 GMT -8
Very nice. It is almost habit forming with these barrels when you stick the calipers on them that you wear out the slide below 1 inch.
Greg
|
|
|
Post by Swamp Fox on Sept 8, 2012 2:56:32 GMT -8
That is nice. Looks like 1 click left and two clicks up should do it.
|
|