|
Post by eddie56 on Sept 8, 2012 10:23:17 GMT -8
Well got my new rifle together.It is an Aero upper reciever with standard profile 16 inch carbine gas system 416R ss 1 in 8 poly BHW barrel.BCM bcg jp muzzel brake jp adj. gas block RRA nm trigger and lower parts kit and YHM free float tube.Due to poor eye sight I will be needing a scope on an American Defense mount.No super match rifle by any means but should shoot pretty well. So I need a new set of dies.I will be loading on a Dillon RL550B.I'm really thinking on the Forster dies with the Super seater.I really don't want to get into neck turning and all that so the bushing dies are pretty much out for me.And really what would I gain?So I guess I need help to get a good straight set of dies as runout will really mess up accuracy.Can anyone make a suggestion?Thanks for any help in this matter.
|
|
|
Post by eddie56 on Sept 8, 2012 10:37:06 GMT -8
Forgot to say it is in 5.56 Nato cal.
|
|
|
Post by GLSHOOTER on Sept 8, 2012 10:46:58 GMT -8
The Forsters will do fine for you. I run mostly Reddings and Hornady but the quality of any of them will be no problem.
Neck turning an AR case for 556/223 is a waste of time in most cases and unless you are a tremendous shooter the gain will never show up on target.
Let us know if you have any problems.
One other thing buy a Hornady Head Space and Comparator set up. You will thank us later when it makes setting up your dies so much easier.
Greg
|
|
|
Post by eddie56 on Sept 8, 2012 10:57:40 GMT -8
Thanks for the reply.I have been meaning on getting the Hornady tools.I have there OAL tool and it seems to help so I will look into the others as well.I got a Forster neck turning tool from a friend some time ago.Never had the proper chamber to try it out.I am just a plinker at heart but do like a measure of accuracy.So thanks again I guess I need to make out a shopping list.
|
|
|
Post by GLSHOOTER on Sept 8, 2012 14:28:04 GMT -8
Thanks for the reply.I have been meaning on getting the Hornady tools.I have there OAL tool and it seems to help so I will look into the others as well.I got a Forster neck turning tool from a friend some time ago.Never had the proper chamber to try it out.I am just a plinker at heart but do like a measure of accuracy.So thanks again I guess I need to make out a shopping list. I quit making lists. Now I just hand the Wife a Sinclair International catalog at Christmas and tell her to pick four things for me..........It's ALL good!! ;D Greg
|
|
|
Post by eddie56 on Sept 8, 2012 16:49:28 GMT -8
I really need to try that!
|
|