|
|
Post by GLSHOOTER on Sept 26, 2013 13:02:57 GMT -8
I got a group picture from Carl last PM. This is one of his 24" 308 barrels that he decided to take for a test drive. No load data other than it was 100 yards out. If Carl had some trigger time it might be even better but he is too busy running around trying to keep production up. Word is I get my first Savage barrel next week.  He tells me this is about what he has been getting with the barrels he has had time to shoot. Greg |
|
|
|
Post by biggdawg on Sept 26, 2013 13:19:10 GMT -8
that is some nice shooting.
Do you know if it is possible to purchase an un chambered savage barrel in 6.5?
I would like one in 6.5-06 and my smith has the reamer but i like the poly barrels.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 26, 2013 14:04:47 GMT -8
that is some nice shooting. Do you know if it is possible to purchase an un chambered savage barrel in 6.5? I would like one in 6.5-06 and my smith has the reamer but i like the poly barrels. At the present time they are chambering all of their barrels. A friend of mine just bought a 6.5 Grendel to rechamber to another cartridge. |
|
|
|
Post by biggdawg on Sept 26, 2013 16:39:22 GMT -8
Thank you i will have to think about that.
|
|
dr69er
Senior Member
Protect the US Consitution & the American Way.
Posts: 222
|
Post by dr69er on Sept 27, 2013 6:42:15 GMT -8
Thank you i will have to think about that. FWIW, I would go with the .260 Remington chambering and then have it re-chambered to 6.5-06' if that is what your looking for...The G'Smith will have a much easier time re-chambering from the .260 Rem. vs. the Grendel as there is much less material to be cut. Good Luck. |
|
|
|
Post by biggdawg on Sept 27, 2013 6:52:15 GMT -8
thanks for the sugestion i will keep that in mind. just trying to decide if i can wait for a barrel.
the smith is trying somethings with the shillen if it doesn't come around i hope there is time to get a barrel before my trip. we will see.
|
|
maxbc
Junior Member
Posts: 10 
|
Post by maxbc on Jul 21, 2015 8:21:56 GMT -8
I am interested in a Savage drop-in 30in barrel. Last I spoke with Jason, you were limited to 26in max length. When will you be set up for longer than 26in?
Thanks
|
|
|
|
Post by GLSHOOTER on Jul 21, 2015 10:55:48 GMT -8
I am interested in a Savage drop-in 30in barrel. Last I spoke with Jason, you were limited to 26in max length. When will you be set up for longer than 26in? Thanks I talked with Carl about this last month. At this time nothing longer than 26" is anticipated. I asked because I wanted one too... Greg |
|
