|
|
Post by sakone007 on May 12, 2011 14:08:52 GMT -8
I have a Mega MaTen & have decided on BHW as my barrel after talking with Jason over @ Mega, now I just need some suggestions on what to get . I as everyone want to get the best range & accuracy out of my barrel . I was planning on getting a 24 in bull barrel & was hoping you guys could offer any suggestions .
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 12, 2011 14:14:37 GMT -8
Do you reload?  If so and want range go with the 24" 243 LBC If you dont reload go with the 264 LBC |
|
|
|
Post by sakone007 on May 12, 2011 14:23:55 GMT -8
I do reload , I know the 308 isn't the best for distance but I have tons of 308 brass & wanted to run a 308 build being that I have tons of stuff for it . You are giving me a good reason to build a new upper  . If I was to go the 243 route what parts would I need to change ?I have everything for my new build minus a rail & barrel . |
|
|
|
Post by sakone007 on May 12, 2011 14:30:26 GMT -8
I'm sorry I should have clarified , this is an ar308 upper & lower receiver .
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 12, 2011 14:36:47 GMT -8
Ok if you are using the AR 10 frame you wont be able to use either one of those calibers..
But in the 10 frame i would go with the 6.5/284 for range.
|
|
|
|
Post by sakone007 on May 12, 2011 14:50:41 GMT -8
I just have too much 308 brass & components to not build a semi 308. . Adding another off caliber isn't in the wallet at this time  . So what do you think would be the best 308 barrel for my ar308 ? |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 12, 2011 15:09:41 GMT -8
You should be good with anything over a 20" i would say, Its a Great rd also, and with you having all the stuff already it will do just fine.
Carl did have some specials going on in a link on here somewhere with some 308 barrels in there i believe.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 12, 2011 15:10:44 GMT -8
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 12, 2011 15:11:07 GMT -8
|
|
|
|
Post by sakone007 on May 12, 2011 16:45:59 GMT -8
Thanks if there in stock I'll take 2 . ;D
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 13, 2011 10:24:46 GMT -8
|
|
|
|
Post by sakone007 on May 13, 2011 11:45:48 GMT -8
I sent an email about getting 2 24" barrels but haven't gotten a reply yet .
|
|
|
|
Post by epointer on May 15, 2011 4:54:13 GMT -8
IMO 18-20" is a good length for the 308.
|
|
|
|
Post by Master Yoda on May 15, 2011 10:44:40 GMT -8
I am told that your barrel request has been addressed
I hope you like the barrels
|
|
|
|
Post by Master Yoda on May 15, 2011 10:48:46 GMT -8
Mega arms just requested and received 20" mid length barrels for Thier custom mag10 rifles
In a word "nice"
|
|
. If I was to go the 243 route what parts would I need to change ?I have everything for my new build minus a rail & barrel .
. So what do you think would be the best 308 barrel for my ar308 ?
