|
Post by maddyn on May 14, 2011 6:38:46 GMT -8
Hello, I am currently in the process of building an Armalite AR-10 and was curious if I can get a barrel from you guys that would fit? It looks like all you have is DPMS pattern barrels. The plans are to make this a hunting rifle in 308 with a 16" barrel and mid length gas system. I also had thoughts of making the barrel a little shorter and permanently attaching a QD muzzle device at 16" OAL for a can since we'll soon be able to use the suppressors we can own here in WA.
Look forward to your response, Thanks
|
|
|
Post by Master Yoda on May 14, 2011 17:45:10 GMT -8
I will be getting back to you with exact details as to the differences-- it is in the bolt design and extension
|
|
|
Post by maddyn on May 16, 2011 6:18:34 GMT -8
So if I were to supply a barrel extension and bolt for fitting you could probably put one together? Thanks for getting back to me
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 16, 2011 10:15:09 GMT -8
So if I were to supply a barrel extension and bolt for fitting you could probably put one together? Thanks for getting back to me Carl says, yes, we can do that for you.
|
|
|
Post by maddyn on May 17, 2011 19:13:52 GMT -8
Wonderful, best news I've heard so far on this build. I'll get a barrel extension and bolt in hand and then find out where to send everything. Thanks
|
|
|
Post by maddyn on Jun 13, 2011 5:32:41 GMT -8
Ok, barrel extensions are back in stock at Armalite finally, I just want to double check that this is still good, and also see what the finished price will be...
-I will be supplying a barrel extension for an Armalite AR-10 and a bolt assembly for headspacing/fitting - I would like to get a 14.5" barrel (16" is ok if you can't/won't do SBR lengths, I am planning on perm attached muzzle device) in .308 with Armalite AR-10 carbine gas system length in a lightweight profile .750 gas block, threaded 5/8x24 - I'd like to get the barrel with the black finish
I think that covers everything, let me know if I missed anything you need to know. If you don't like posting prices on the form just send me a PM or you can reach me at maddyn@yahoo.com
Thanks again
|
|