|
Post by usmcm16a2 on Sept 30, 2015 10:47:47 GMT -8
Folks,
I have purchased 2 barrels from BHW, 20" AND 18" rifle length, and mid-length. I built both of them M4E1 Uppers from Aero Precision. The 18 has about about 400 rounds through it, mostly load development. wWent out to the range on Monday 9/28 and wow. Load RX, was new PPU brass, 29.5gr CFE-223, 210M primer, 100gr Barnes TTSX 6.5, and a COAL of 2.195. HELLO, .38 inch 3 shot group at 100 yds. These barrels are .264LBC with bolts from AR15depot. Cannot say enough good things about BHW. A2
|
|
|
Post by GLSHOOTER on Sept 30, 2015 13:55:57 GMT -8
Welcome to the board and feel free to share. Lots of good information here if you dig a bit and the current crop of denizens is pretty friendly and knowledgeable.
Greg
|
|