Post by durhamster on May 20, 2011 17:10:25 GMT -8
;D
Gale called me today. ;D
All my parts for the upper have came in.
264
20" 1 to 8 twist. will be using a 130 gr. bullet.
Railed upper.
Gas Piston operated system.
Dragon Head.
They called with a color question, Black.
I have been loading up many different load looking toward the day.
So when I get it in, I will put it on the lower I use for the 7.62X39.
I have picked up a new rail mt. for the scope. and a Harris 6x9 By pod.
I have gotten about two hundred 7.62X39 formed to 6.5 Grendel
ready to fire form.
I picked up 2000 rd of Winchester 7.62X39 once fired brass for $60.00 PER 1000. Got it on Virginia gun Trader.
Also a friend is machining me a Punch so I can try Hydro forming the 7.62X39 to the Grendel 6.5.
Now I have to trim the cases to the 2.25 . When I fire form them they will be a little short. Will not know for sure until I get to run them thought the new upper.
If I hydro form the case, I will be able to neck down to a case that is formed already.
Having way to much fun.
During this time I have been looking for ways to do a better job cleaning the Brass.
I ordered Stainless media, Man oh man what a wonderful job it dose.
Outside, inside, and pocket look better than new.
I have never seen anything work like this.
www.stainlesstumblingmedia.com/
This works as advertised.
Looking for the 264 to be my tack driver. so the extra time on the brass is OK for me.
And no more having to get more media..
I will post pics when I get my upper.
Also will post after I get to the range.
It looks like it might get shipper next week.
Is it Christmas yet???
Thank you Gale,
Carl and Crew.
Gale called me today. ;D
All my parts for the upper have came in.
264
20" 1 to 8 twist. will be using a 130 gr. bullet.
Railed upper.
Gas Piston operated system.
Dragon Head.
They called with a color question, Black.
I have been loading up many different load looking toward the day.
So when I get it in, I will put it on the lower I use for the 7.62X39.
I have picked up a new rail mt. for the scope. and a Harris 6x9 By pod.
I have gotten about two hundred 7.62X39 formed to 6.5 Grendel
ready to fire form.
I picked up 2000 rd of Winchester 7.62X39 once fired brass for $60.00 PER 1000. Got it on Virginia gun Trader.
Also a friend is machining me a Punch so I can try Hydro forming the 7.62X39 to the Grendel 6.5.
Now I have to trim the cases to the 2.25 . When I fire form them they will be a little short. Will not know for sure until I get to run them thought the new upper.
If I hydro form the case, I will be able to neck down to a case that is formed already.
Having way to much fun.
During this time I have been looking for ways to do a better job cleaning the Brass.
I ordered Stainless media, Man oh man what a wonderful job it dose.
Outside, inside, and pocket look better than new.
I have never seen anything work like this.
www.stainlesstumblingmedia.com/
This works as advertised.
Looking for the 264 to be my tack driver. so the extra time on the brass is OK for me.
And no more having to get more media..
I will post pics when I get my upper.
Also will post after I get to the range.
It looks like it might get shipper next week.
Is it Christmas yet???
Thank you Gale,
Carl and Crew.