|
|
Post by brink15 on Jul 16, 2016 13:56:43 GMT -8
I purchased the light machine finish 1/11 twist bhw .308 barrel for my aero .308 build. Havent put more than 50 rds through it cleaning after every few rds. I can not seem to get a decent group. i have checked and checked all my nuts and screws and scope mount and everythings tight. Shot a better group with my muzzleloder. Please help.
|
|
|
|
Post by GLSHOOTER on Jul 16, 2016 19:18:55 GMT -8
Factory or hand loads? Muzzle device? What bullet?
Greg
|
|
|
|
Post by brink15 on Jul 17, 2016 5:14:34 GMT -8
Factory. Federal 168 grain Tactical Bonded Ballistic Tip LE308TT2 - .308 Win 168gr TBBC Polymer Tip. Also using a silencer co ASR muzzle brake so in the future I can quick connect to my suppressor
|
|
|
|
Post by GLSHOOTER on Jul 17, 2016 7:09:17 GMT -8
Factory. Federal 168 grain Tactical Bonded Ballistic Tip LE308TT2 - .308 Win 168gr TBBC Polymer Tip. Also using a silencer co ASR muzzle brake so in the future I can quick connect to my suppressor I'll talk to Ritch about this but my first step would be to take off any brakes or attachments and shoot five rounds through it. I like to start with a baseline no frills attached tube and I want a baseline group. How big are the current groups? Greg |
|
|
|
Post by brink15 on Jul 17, 2016 10:19:22 GMT -8
I will try it. 4 inch at 100
|
|
