|
|
Post by londerko on Apr 18, 2018 13:02:32 GMT -8
Is a 1/7 twist ideal for a 10.5” barrel? Or is 1/8 ok?
Is the carbine gas system on that barrel finicky at all?
Do most people run adjustable gas blocks with that length barrel?
-Leo
|
|
|
|
Post by GLSHOOTER on Apr 18, 2018 15:46:58 GMT -8
Is a 1/7 twist ideal for a 10.5” barrel? Or is 1/8 ok? Is the carbine gas system on that barrel finicky at all? Do most people run adjustable gas blocks with that length barrel? -Leo An 8 is fine. My M16 is a 12. Not overly finicky in my experience. I don't run adjustable on these. Nothing wrong with having one handy though. Greg |
|
|
|
Post by londerko on Apr 19, 2018 6:05:38 GMT -8
Ok, thanks for the reply
I’ve never owned a short barrel like this before.
Just wanted to make sure there wasn’t anything obvious i was missing or needing.
My Hbar M16 Upper is a 1/12 twist too, it’s shoots great but puts anything heavier than a 55gr sideways through the paper
|
|
|
|
Post by GLSHOOTER on Apr 19, 2018 6:27:55 GMT -8
Ok, thanks for the reply I’ve never owned a short barrel like this before. Just wanted to make sure there wasn’t anything obvious i was missing or needing. My Hbar M16 Upper is a 1/12 twist too, it’s shoots great but puts anything heavier than a 55gr sideways through the paper Many times the 63 grain SIERRA SMP will shoot well in them. Greg |
|
|
|
Post by londerko on Apr 19, 2018 10:08:46 GMT -8
Thanks!
I’ll give em a try 👍
|
|
