|
|
Post by quackhead77 on Feb 2, 2020 14:34:57 GMT -8
Hi all I am new here. I am in the process of a 243LBC build (waiting for my barrel to arrive) I have CH4D dies on the way and some Hornady brass. (Want to make sure I have brass resizing dialed in before I buy the good stuff) I have a variety of powders and Bullets from 70grn to 105. Would any one be willing to give out some load data for a starting point. I plan on barrel brake in with the Nosler 70 grn only because I have no real use for them.
Thanks shane
|
|
|
|
Post by GLSHOOTER on Feb 2, 2020 16:16:36 GMT -8
Hi all I am new here. I am in the process of a 243LBC build (waiting for my barrel to arrive) I have CH4D dies on the way and some Hornady brass. (Want to make sure I have brass resizing dialed in before I buy the good stuff) I have a variety of powders and Bullets from 70grn to 105. Would any one be willing to give out some load data for a starting point. I plan on barrel brake in with the Nosler 70 grn only because I have no real use for them. Thanks shane The quick way is take top pressure 6 PPC load data and work up to bottom end 6 BR loadings. You will find you usually are on the low end for the BR. I'll give this some more attention tomorrow. These barrels don't need to be broken in..trust me on that!! Greg |
|
|
|
Post by quackhead77 on Feb 2, 2020 16:36:10 GMT -8
Greg, thank you for the reply.
|
|
|
|
Post by kaldor on Mar 3, 2020 6:50:29 GMT -8
Hi all I am new here. I am in the process of a 243LBC build (waiting for my barrel to arrive) I have CH4D dies on the way and some Hornady brass. (Want to make sure I have brass resizing dialed in before I buy the good stuff) I have a variety of powders and Bullets from 70grn to 105. Would any one be willing to give out some load data for a starting point. I plan on barrel brake in with the Nosler 70 grn only because I have no real use for them. Thanks shane The quick way is take top pressure 6 PPC load data and work up to bottom end 6 BR loadings. You will find you usually are on the low end for the BR. I'll give this some more attention tomorrow. These barrels don't need to be broken in..trust me on that!! Greg Very interesting way of looking at it. Ive looked at alot of 6 PPC data to get started, but never thought to look at 6BR for max charges. |
|
