crs89
Junior Member
Posts: 18
|
Post by crs89 on Mar 2, 2021 13:41:58 GMT -8
Got these to try when they was on sale and am very impressed. Used once fired nosler brass. Loaded up with 30gr of 10x and a OAL of 2.295" did not get velocity cause I swapped rails and didnt have enough barrel to hook the v3 to but I'm gonna assume 2500ish. This is 4 shots at 100 yards.  |
|
|
|
Post by GLSHOOTER on Mar 20, 2021 14:03:10 GMT -8
Very nice work. You should be right on 2525 with that laod.
Greg
|
|
|
|
Post by westyd1982 on Apr 15, 2024 12:11:50 GMT -8
I got my upper built last fall (20" 1x9.73 target crown barrel) and finally received my order of Starline 6.8 SPC brass last week. I loaded 10 rounds with 125gr Hornady FMJ with 31.5gr AA2200 with a COL of 2.295". On new cases, I couldn't get much more powder in. They shot great and it looks like my next loads will be at 32.2gr AA2200. This looks like a good loading from another thread here. A few observations: using the split case technique, the Hornady 125 gr FMJ touches the lands in my barrel at 2.320" COL. With the magazine I have, I could only have a COL of 2.3" or the cartridges won't fit in it. I will stick with COL of 2.295" for the next loads.
|
|
|
|
Post by GLSHOOTER on Apr 15, 2024 12:25:51 GMT -8
Sounds good. You can pick up ASC STAINLESS STEEL magazines that load to a nominal 2.314. For dead nuts measuring to the lands get the Sinclair distance to lands tool from Brownells.
Greg
|
|
