|
|
Post by inferno333 on May 6, 2011 7:50:38 GMT -8
I'm looking to build a 5.56 AR with a 14.5" barrel.
Can the Dragon Head MB be pinned to the barrel to make it meet the 16" length requirement?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 6, 2011 8:32:33 GMT -8
Our DH muzzle break is 2" and as a general rule we personally do not pin our barrels.
|
|
|
|
Post by inferno333 on May 7, 2011 21:01:54 GMT -8
Hmmm...
Is there a reason why you don't?
I was really hoping to use a 14.5" barrel for this build.
|
|
|
|
Post by Master Yoda on May 8, 2011 16:21:21 GMT -8
We leave the pinning and welding up to the barrel owner
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 8, 2011 19:34:24 GMT -8
I dont think you can go wrong with the DH and the threads, works great.
|
|
|
|
Post by inferno333 on May 10, 2011 15:17:06 GMT -8
Looks like I better find a good gunsmith in my area.
Once I sell my Tactical Rifles SPG then i'll be building a new 5.56 AR.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 10, 2011 16:17:35 GMT -8
What will you be needing a Smith for if you dont mind me asking, just trying to get a feel for what you wanting to build?
Thanks Billy
|
|
|
|
Post by inferno333 on May 11, 2011 18:50:15 GMT -8
I cannot own a SBR in Iowa. The minimum barrel length is 16".
I just want to have as short of barrel as possible.
The only option is to buy a 14.5" barrel and have a >1.5" muzzle break pinned/welded on.
|
|
|
|
Post by tcjohnson7 on Jun 25, 2011 22:50:30 GMT -8
What is the weight of the brake?
|
|
|
|
Post by riemer on Jun 28, 2011 13:22:40 GMT -8
Will Dragon Head brakes EVER be availble again? I had my barrel threaded for it but after the wait for the barrel the brakes or back ordered?
Whats the deal
|
|
|
|
Post by knightdive on Dec 27, 2011 21:52:40 GMT -8
I cannot own a SBR in Iowa. The minimum barrel length is 16". I just want to have as short of barrel as possible. The only option is to buy a 14.5" barrel and have a >1.5" muzzle break pinned/welded on. Careful on that, approximately 1/2" of the FH will be threaded onto the barrel so you actually need 2" or more worth of FH to reach a 16" total. |
|
